真人做爰直播 在线看

    <big id="gyvhq"></big><tr id="gyvhq"></tr>

  • <code id="gyvhq"></code>
    1. <th id="gyvhq"><sup id="gyvhq"></sup></th>
    2. <object id="gyvhq"></object>
      <strike id="gyvhq"></strike>
        Your position:Home > Products > Sludge Disposal

        Biodiesel Sludge Dryer

        Feeding granularity: ≤50mm  

        Applications: It is applied to metallurgy, drying, chemistry, building materials, refractory materials, papermaking sludge and other industries.
        Materials: non adhesive or weakly bonding smoke.
        Product introduction: biodiesel industry is a kind of new arising industry. With growing national remediation of gutter oil which retures to table, more and more biodiesel enterprises which regard waste cooking oil as raw materials develop gradually. 

        Sales Hotline:

        0086-18539990967

        Technical introduction

        Biodiesel sludge dryer:
        Biodiesel industry is a kind of new arising industry. With growing national remediation of gutter oil which retures to table, more and more biodiesel enterprises which regard waste cooking oil as raw materials develop gradually. With the development of biodiesel industry, sewage disposal in this industry gets more and more attention from factories. Sewage in biodiesel has following common problems: high content of sulphuric, low PH value, the highest content of sulfate radical reaches to 20%; high concentration of organic matters (COD); high ratio of B/C; after removal of sulfuric acid, sewage becomes high concentrated organic wastewater; with good biodegradability; biodiesel sludge dryer which is based on dehumidifying heat pump technology has technical advantages in the process of disposing sewage from biodiesel enterprises. This article explains this technology briefly. Hope it can help people in biodiesel industry.
         With growing national remediation of gutter oil which retures to table, more and more biodiesel enterprises which regard waste cooking oil as raw materials develop gradually. 
        Biodiesel sludge dryer

        Advantages

        The biodiesel sludge dryer developed by Zhengzhou taida adopts dehumidifying heat pump technology which refers to a device that uses the refrigeration system to use the hot and humid air and recover the latent heat through heat pump principle. Dehumidifying heat pump means a combination of dehumidifying (dehydration) and heat pump (energy recycle). Dehumidifying heat pump sludge dryer is a kind of equipment which aims at materials with high moisture content, high viscosity, high water holding capacity and low thermal value. speicially developed sludge drying equipment holds two-effect and tri-effect patent technology, which makes comprehensive dehumidifying performance ratio reach to over 20%. This technology solves problems such as bad dehumidifying performance and racing problem under hot temperature and low moisture condition. Biodiesel sludge dryer takes advantage of dehumidifying heat pump to dry sludge with hot air circulating and cooling dehumidifying. The traditional sludge thermal drying system provides 90% heating into the exhaust heat loss (water vapor latent heat and sensible heat of hot air); dehydration refers to recycling steam latent heat and damp of air in air emissed. There is no waste heat emissed in the dehydrating process.
        The heat pump biodiesel sludge dyer provides hot COP whose thermal value is generally from 3 to 5. Only 1kw electricity powe should be conveyed in this system while 4kw electricity needed in traditional dehydrating system. Heat source comes from air water vapor’s phase change and release of condensation heat atmospheric: when the temperature is 30 minus degree centigrade, the caloric value is 2424kj/kg; when the temperature is 60 degree centigrade, the calorific value is 2355kj/kg; when the temperature is 100 degree centigrade, the caloric value is 2258kj/kg (coal calorific value 18000kj/kg). 
         Biodiesel sludge dryer
        Low-temperature sludge drying technology represented by biodiesel sludge dryer represents the development direction of future technology. Low temperature technology is a kind of disposal techology where hot dry air produced from low temperature system circulates in the system to dry sludge. The solid content of sludge can be maintained at 20% after being disposed by plate and frame filter press, bag filter press and centrifugal hydroextractor. After being disposed by biodiesel sludge dryer, the sludge can be dried to dry mud with 90% solid content. Our sludge dryer adopts advanced dehumidifying heat pump technology and can save over 40% energy. About 0.25-kw/h electricity is consumed to split one-ton water from sludge. It can adopt peak electricity mode, which can save energy over 60%. In sludge drying equipment, one-kw/h electricity is consumed for one-kg water. Besides, cold water, medicament and other materials are also needed. The technology can reduce one quarter of the sludge volume. Only electricity is consumed in this process. In addition, the energy consumption is only one thirds of normal drying equipment. There is no need for special uniform distribution of sludge. Also, there is no requirement for moisture content. Only the external temperature is maintained from 10 to 35 degree centigrade, the whole process can run efficiently. The automatic control system of biodiesel sludge dryer can not only improve running efficiency, but also hold good running environment. It is always applied to disposing various sludges from small-medium sewage plants. 
         

        Working principle

        Technical parameters

        Biodiesel sludge dryer—bucket type
        Model JHJ-WNB-200FL JHJ-WNB-400FL JHJ-WNB-800FL
        Water eliminated /24H 200KG 400KG 800KG
        Dehydration capacity 8-13kg/h 15-23kg/h 30-46kg/h
        Total power 3.5kw 6kw 12kw
        Energy consumption 2.3-3.5kg/ 2.3-3.5kg/ 2.3-3.5kg/
        Number of compressor 1 1 1
        Specification of bunker 800*800*750 1000*1000*900 1200*1200*1100
        Cooling Air cooling Air cooling Air cooling
        Cryogen R134a R134a R134a
        Power supply 220V/380V460V3H/50HZ 220V/380V460V3H/50HZ 220V/380V460V3H/50HZ
        Drying temperature 40-55degree centigrade /60-80degree centigrade  40-55degree centigrade /60-80degree centigrade 40-55degree centigrade (回風)/60-80degree centigrade (送風)
        Control system Touch screen, PLC Touch screen, PLC Touch screen, PLC
        Moisture content of dry material 10-30% 10-30% 10-30%
        Overall dimensions 1650*1150*1500 12200*1350*1700 2600*1550*2000
        Structure Whole set    

        Biodiesel sludge dryer
        Biodiesel sludge dryer—continous mode chart 1
        Biodiesel sludge dryer
        Model JHJ-WNL-1000FL JHJ-WNL-2000FL JHJ-WNL-4000FL JHJ-WNL-6000FL
        Water amount eliminated/24H 1000kg 2000kg 4000kg 6000kg
        Water amount eliminated 42kg 83kg 166kg 249kg
        Total power 14kw 26kw 50kw 74kw
        Number of heat pump module 1 1 2 3
        Number of compressor 2 4 8 12
        Cooling method Wind cooling Wind cooling Wind cooling Wind cooling
        Flow amount of cooling water // // // //
        Cryogen R134a R134a R134a R134a
        Power supply 220V/380V460V3H/50HZ 220V/380V460V3H/50HZ 220V/380V460V3H/50HZ 220V/380V460V3H/50HZ
        Drying temperature 48-56degree centigrade/65-80degree centigrade 48-56degree centigrade /65-80 degree centigrade 48-56degree centigrade/65-80degree centigrade 48-56degree centigrade/65-80degree centigrade
        Control system Touch screen, PLC Touch screen, PLC Touch screen, PLC Touch screen, PLC
        Wet sludge application Moisture content:70 to 85% Moisture content:70 to 85% Moisture content:70 to 85% Moisture content:70 to 85%
        Moisture content of dry materials Moisture content:10 to 50% (adjustable) Moisture content:10 to 50% (adjustable) Moisture content:10 to 50% (adjustable) Moisture content:10 to 50% (adjustable)
        Molding method Slitting/granulation Slitting/granulation Slitting/granulation Slitting/granulation
        Overall dimension mm 2435*2190*2420 3760*2190*2420 6460*2190*2420 9160*2190*2420
        Structure Whole set      
        Printing and dyeing sludge dryer—continuous mode (belt type) chart 2
        Printing and dyeing sludge dryer
        Model JHJ-WNL-8000SL/FL JHJ-WNL-12000SL/FL JHJ-WNL-16000SL/FL
        Water amount eliminated/24H 8000kg 12000kg 16000kg
        Moisture amount eliminated/H 333kg 500kg 667kg
        Total power 98kw 138kw 185kw
        Number of heat pump module 2 3 4
        Number of compressor 8 12 16
        Cooling method Water cooling Water cooling Water cooling
        Water amount used for cooling 4.5CBD/H 7CBD/H 9CBD/H
        Cryogen R134a R134a R134a
        Power supply 220V/380V460V3H/50HZ 220V/380V460V3H/50HZ 220V/380V460V3H/50HZ
        Drying temperature 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade
        Control system Touch screen, PLC Touch screen, PLC Touch screen, PLC
        Application of wet sludge Moisture content: 70% to 85% Moisture content: 70% to 85% Moisture content: 70% to 85%
        Moisture content of dry materials Moisture content: 10 to 50% (adjustable) Moisture content: 10 to 50% (adjustable) Moisture content: 10 to 50% (adjustable)
        Molding method Slitting/ granulating Slitting/ granulating Slitting/ granulating
        Overall dimension 7900*3110*3300 11150*3110*3300 14400*3110*3300
        Structure Assemble      


        Biodiesel sludge dryer
        Biodiesel sludge dryer—continous mode (belt type) chart 3
        Model JHJ-WNL-20000SL JHJ-WNL-24000SL JHJ-WNL-28000SL JHJ-WNL-32000SL JHJ-WNL-36000SL JHJ-WNL-40000SL
        Water amouont eliminated/24H 20000kg 24000kg 28000kg 32000kg 36000kg 40000kg
        Water amount eliminated/H 833kg 1000kg 1167kg 1333kg 1500kg 1667kg
        Total power 230kw 276kw 322kw 368kw 415kw 460kw
        Number of dehumidifying heat pump 5 6 7 8 9 10
        Number of compressor 20 24 28 32 36 40
        Cooling method Water cooling Water cooling Water cooling Water cooling Water cooling Water cooling
        Flow amount of cooling water 11m3/h 13.5m3/h 16m3/h 18m3/h 20.5m3/h 23m3/h
        Cryogen R134a R134a R134a R134a R134a R134a
        Power supply 220/360/460V 220/360/460V 220/360/460V 220/360/460V 220/360/460V 220/360/460V
        Drying temperature 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade
        Control system Touch screen, PLC Touch screen, PLC Touch screen, PLC Touch screen, PLC Touch screen, PLC Touch screen, PLC
        Application of wet sludge Moisture content 70-83% Moisture content 70-83% Moisture content 70-83% Moisture content 70-83% Moisture content 70-83% Moisture content 70-83%
        Moisture of dry materials Adjustable10-50% Adjustable10-50% Adjustable10-50% Adjustable10-50%
         
        Adjustable10-50% Adjustable10-50%
        Molding method Slitting/ granulating Slitting/ granulating Slitting/ granulating Slitting/ granulating Slitting/ granulating Slitting/ granulating
        Overall dimension 17650*3110*3300 209000*3110*3300 24150*3110*3300 27400*3110*3300 30650*3110*3300 33900*3110*3300
        Structure Assemble Assemble Assemble Assemble Assemble Assemble
        Mutil-layer printing and dyeing sludge dryer—continous mode (belt)
        Model JHJ-WNL-40000SLF JHJ-WNL-48000SLF JHJ-WNL-56000SLF JHJ-WNL-64000SLF JHJ-WNL-72000SLF JHJ-WNL-80000SLF
        Water amouont eliminated/24H 40000kg 48000kg 56000kg 64000kg 72000kg 80000kg
        Water amount eliminated/H 1666kg 2000kg 2334kg 2666kg 3000kg 3334kg
        Total power 460kw 552kw 644kw 736kw 830kw 920kw
        Number of dehumidifying heat pump 10 12 14 16 18 20
        Number of compressor 40 48 56 64 72 80
        Cooling method Water cooling Water cooling Water cooling Water cooling Water cooling Water cooling
        Flow amount of cooling water 23m3/h 27m3/h 32m3/h 36m3/h 41m3/h 46m3/h
        Cryogen R134a R134a R134a R134a R134a R134a
        Power supply 220/360/460V 220/360/460V 220/360/460V 220/360/460V 220/360/460V 220/360/460V
        Drying temperature 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade)/65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade 48-56 degree centigrade /65-80 degree centigrade
        Control system Touch screen, PLC Touch screen, PLC Touch screen, PLC Touch screen, PLC Touch screen, PLC Touch screen, PLC
        Application of wet sludge Moisture content: 70% to 83% Moisture content: 70% to 83% Moisture content: 70% to 83% Moisture content: 70% to 83% Moisture content: 70% to 83% Moisture content: 70% to 83%
        Moisture content of dry materials Adjustable 10-50% Adjustable10-50% Adjustable10-50% Adjustable10-50% Adjustable10-50% Adjustable10-50%
        Molding method Slitting/ granulating Slitting/ granulating Slitting/ granulating Slitting/ granulating Slitting/ granulating Slitting/ granulating
        Overall dimension 17650*3110*6600 209000*3110*6600 24150*3110*6600 27400*3110*6600 30650*3110*6600 33900*3110*6600
        Structure Assemble          
        The energy consumption of our sludge dryer is one third of common drying method. In common dryer, l-kw electricity is consumed to evaporate 1-kg water. Low temperature sludge drying system adopts energy conversion technology with low energy consumption. Without considering outer heat source, 0.33 to 0.4 kw/h electricity is needed to evaporate 1-kg water for standard products. Special plate-fin type regenerative cycle, double-effect heat pump dehumidifier and tri-effect heat pump dehumidifier are advanced technology at home and abroad. These technologies not only overcome the bottlenecks of traditional refrigeneration and dehumidfication, but also expand applications of refrigeneration and dehumidification technologies.
        Generally, the heat pump dehumidifier used by biodiesel sludge dryer adopts multi-layer belt conveying device matching with pellet press. It can produce sludge granular fertilizer constantly. Taking heat pump dehumification drying device which disposes 10-cubic meter sludge as example, equipment only covers a 60-square meter area; when the amount of sludge disposed increases, users can assemble several sets of drying devices together, which will expand production capacity. 

        Relevant cases

        Order Online

        Please pay attention: in order to get timely contact with you, please leave us your complete information such as your contact number, your demand (types of your raw materials, volume, feed size and size of final products); you can also contact us by business link. Really hope we can be your stasified partner.

        • Product:
        • Name:
        • Email:
        • Usage Region:
        • Your Demand:

        Sludge Reclamation

        Matching Device

        Sales hotline:0086-18539990967

        Address of headquarters:NO. 198, longding industrial zone, high-tech development zone, zhengzhou city, china

        Email:vip@tdaxy.com

        Zhengzhou Taida Group    Address:NO. 198,longding industrial zone,high-tech development zone,zhengzhou city,china    Sitemap

        真人做爰直播 在线看
        <big id="gyvhq"></big><tr id="gyvhq"></tr>

      1. <code id="gyvhq"></code>
        1. <th id="gyvhq"><sup id="gyvhq"></sup></th>
        2. <object id="gyvhq"></object>
          <strike id="gyvhq"></strike>